Page 288

2017 SEAWIDE DISTRIBUTION CATALOG

TLM Series Fluid Sensors Maretron®’s TLM unit is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM unit mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. • works on tanks up to ’” in depth TLA100-01 The TLA is used to adapt commercially available resistive tank senders to NMEA ® network. The TLA is compatible with both the American standard (’- ohm) and the European standard (-Ž ohm) resistive senders. Can be calibrated for irregular tank shapes Can be used with analog gauges Item# List TLM- Tank level Mon (’” Depth) NMEA $. FPM100-01 Fluid Pressure Monitor Maretron® ’s Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA ® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA ® compatible displays. With the appropriate transducer, the FPM reports either pressure or vacuum for a variety of applications including water pressures, oil pressures, hydraulic pressures, or system vacuum for detecting clogged filters. Item# List FPM- Fluid Pressure Monitor $. TMP100 Maretron® ’s TMP measures the temperature for up to “ temperature probes and reports the information over an NMEA ® network. The TMP supports up to ’ thermistor probes and high temperature thermocouple probes. AC/DCM100 Maretron® ’s ACM is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA ® marine data network. ACM output information is then displayed with networked NMEA ® equipment such as the Maretron® DSM‹ dedicated display or with NMEA ® compatible software such as Maretron® NKView®. When the DCM is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, charging current and terminal voltage to precisely computer battery state of charge, state of health, and time remaining. Item# List ACM- AC Power Monitor, NMEA $. DCM- DC Power Monitor, NMEA $. Item# List TMP- Temperature Sensor Module, NMEA ® $. TP-AAP- Ambient Air Temperature Probe* $. TP-EGT- Exhaust Gas Temperature (EGT) Probe* $ . TRK Ring/Under Bolt Temperature Probe** $. * TMP100 Accessory ** DCM100 & TMP100 Accessory Item# List TLA- Tank Level Adapter $. DCR100 NMEA 2000® Direct Current Relay Module Maretron® ’s DCR contains “ Direct Current (DC) relays, each capable of switching up to amps. The DCR connects directly to an NMEA ® network, so you can turn on and oŸ the relays from any device onboard or remotely running Maretron’s NKView® software. The DCR easily handles resistive DC loads like lights, or inductive DC loads like pumps and motors. The DCR can also be used to switch AC circuits using external relays. Six Relays for On / OŸ Control Over NMEA ® Network Each Relay Capable of Carrying Up to amps Individual Relay Electrical Current Monitoring Automatic Relay Over Current Shutdown (Shuts Down at « amps) Automatic Relay Thermal Shutdown (Over Temperature Protection) Item# List DCR- Direct Current Relay Module $. Maretron Monitors 286 Maretron


2017 SEAWIDE DISTRIBUTION CATALOG
To see the actual publication please follow the link above