⊲⊲Converts a variety of flow senders (e.g., fuel, water,
etc.) to NMEA 2000® Network Data
⊲A⊲ ll flow senders ordered separately
depending on application
⊲⊲Use positive displacement metering technology
⊲⊲Do not require costly fuel conditioning components
⊲⊲Implement true temperature compensation
⊲A⊲ utomatically detect reverse flow due to fluctuating
pressure difference from injection pumps
TLM Series Fluid Sensors
Maretron®’s TLM unit is used to sense fluid levels
of tanks by using ultrasonic technology. Ultrasonic,
or sound waves, are transmitted via the TLM unit
mounted at the top of the tank and the flight times of
the sound waves to and from the fluid are measured
much like a depth sensor.
• works on tanks up to 40” in depth
TMP100-01 Temperature Sensor Module, NMEA 2000® $295.00
TP-AAP-1 Ambient Air Temperature Probe* $24.50
TP-EGT-1 Exhaust Gas Temperature (EGT) Probe* $129.00
TR3K Ring/Under Bolt Temperature Probe** $25.00
The TLA100 is used to adapt commercially available
resistive tank senders to NMEA 2000® network.
The TLA100 is compatible with both the American
standard (240-33 ohm) and the European standard
(10-180 ohm) resistive senders.
⊲⊲Can be calibrated for irregular tank shapes
⊲⊲Can be used with analog gauges
TLM100-01 Tank level Mon (40” Depth) NMEA 2000 $225.00
Fluid Pressure Monitor
Maretron® ’s Fluid Pressure Monitor is used to adapt
up to six pressure transducers to the NMEA 2000®
network (pressure transducers sold separately).
This allows you to observe fluid pressures and tank
levels anywhere on the vessel where there are
NMEA 2000® compatible displays. With the appropriate
transducer, the FPM100 reports either pressure
or vacuum for a variety of applications including
water pressures, oil pressures, hydraulic pressures,
or system vacuum for detecting clogged filters.
FPM100-01 Fluid Pressure Monitor $395.00
PT-0-3PSI-01 Pressure Xdcr 0 to 3 PSI $149.00
PT-0-5PSI-01 Pressure Xdcr 0 to 5 PSI $149.00
Maretron® ’s TMP100 measures the temperature
for up to 6 temperature probes and reports the
information over an NMEA 2000® network.
The TMP100 supports up to 4 thermistor probes
and 2 high temperature thermocouple probes.
* TMP100 Accessory
** DCM100 & TMP100 Accessory
TLA100-01 Tank Level Adapter $295.00
Maretron® ’s ACM100 is a device which monitors AC
power sources and outputs information about these
sources onto the industry standard NMEA 2000®
marine data network. ACM100 output information is
then displayed with networked NMEA 2000® equipment
such as the Maretron® DSM250 dedicated
display or with NMEA 2000® compatible software
such as Maretron® N2KView®.
ACM100-01 AC Power Monitor, NMEA 2000 $495.00
Fuel Flow Monitor
Maretron® ’s FFM100 provides precision fuel flow information to help optimize
fuel consumption, which can save thousands of dollars in fuel operating cost.
FFM100-01 Fuel Flow Monitor $395.00
M1AR Fuel Flow Sensor 2 to 100 LPH (0.53 to 26.4 GPH) $395.00
M2AR Fuel Flow Sensor 25 to 500 LPH (6.6 to 132 GPH) $495.00
M4AR Fuel Flow Sensor 180 To 1500 LPH (48 to 396 GPH) $695.00